R 1EFF : 001-001, 004-049, 051-099, 101-149, 1 05-51-16Page 605

1151-199, 201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
|ITEM|INSP|  INSPECTION TASKS  |PHASE|PHASE|PHASE|INSP|REF.|
 |  |CODE|  |  1  |  2  |  3  |SIGN|FIG.|
 |----|----|---------------------------------------|-----|-----|-----|----|----| 
R  |  |  |  (Ref. TASK 32-41-11-000-006).  |  |  |  |  |  | 
R  |  |  |  (Refer to the manufacturer's  |  |  |  |  |  |
 |  |  |  instructions for the overhaul  |  |  |  |  |  |
 |  |  |  procedure).  |  |  |  |  |  | 
R  |  |  |  NOTE: If fuse plug is melted, also |  |  |  |  |  |
 |  |  |  remove the adjacent wheel for|  |  |  |  |  |
 |  |  |  overhaul.  |  |  |  |  |  |
 |  |  |(2) Remove the brake for overhaul  |  X  |  |  |  |  | 
R  |  |  |  (Ref. TASK 32-42-27-000-001).  |  |  |  |  |  | 
R  |  |  |  (Refer to the manufacturer's  |  |  |  |  |  |
 |  |  |  instructions for the overhaul  |  |  |  |  |  |
 |  |  |  procedure).  |  |  |  |  |  |
 |  |  |(3) Remove the axle sleeve  |  X  |  |  |  |  | 
R  |  |  |  (Ref. TASK 32-42-71-000-001).  |  |  |  |  |  |
 |  |  |(4) Do the Inspection of the MLG Axles |  X  |  |  |  |  |
 |  |  |  after Brake Overheat  |  |  |  |  |  | 
R  |  |  |  (Ref. TASK 32-11-00-200-007).  |  |  |  |  |  |
 |  |  |(5) Examine the axle sleeve for  |  X  |  |  |  |  | 
R  |  |  |  distortion and damaged surface.  |  |  |  |  |  |
 |  |  |(6) Installation of the removed  |  |  |  |  |  | 
R  |  |  |  components  |  |  |  |  |  |
 |  |  |  (a) Install serviceable components:|  |  |  |  |  |
 |  |  |  - for the axle sleeve  |  |  |  |  |  |
 |  |  |  (Ref. TASK 32-42-71-400-001)  |  |  |  |  |  |
 |  |  |  - for the brakes  |  |  |  |  |  |
 |  |  |  (Ref. TASK 32-42-27-400-001)  |  |  |  |  |  |
 |  |  |  - for the wheels  |  |  |  |  |  | 
R  |  |  |  (Ref. TASK 32-41-11-400-006).  |  |  |  |  |  |
 -------------------------------------------------------------------------------
**ON A/C 002-003,
 Subtask 05-51-16-210-051-A 
R  B. Inspection of the Wheels and Brakes
 CAUTION : DO NOT TRY TO APPLY PRESSURE TO THE BRAKES WHEN THE ROTORS ARE_______
 NOT ALIGNED.
 (Ref. TASK 32-42-27-000-001) (Ref. TASK 32-42-27-400-001) (Ref. TASK 32-
42-27-210-006) (Ref. TASK 32-41-11-000-006) (Ref. TASK 32-41-11-400-006) 

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 05-51-16Page 606 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 (Ref. TASK 32-42-71-000-001) (Ref. TASK 32-42-71-400-001) (Ref. TASK 32-11-00-200-007)

 -------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| |  1  |  2  |  3  |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| R | A.| |Inspection after the melting of the | | | | | | R | | |183 deg.C (361.4 deg.F) fuse plug(s) | | | | | | R | | |and the reported cockpit indication of | | | | | | R | | |the brakes temperature not more than | | | | | | R | | |900 deg.C (1652 deg.F) | | | | | | | | | | | | | | | | | |(1) Remove the related wheel and the |  X  | | | | | R | | | adjacent wheel for overhaul | | | | | | R | | | (Ref. TASK 32-41-11-000-006). | | | | | | R | | | (Refer to the manufacturer's | | | | | | | | | instructions for the overhaul | | | | | | | | | procedure). | | | | | | | | |(2) Examine the brake unit for damage  |  X  | | | | | R | | | or distortion | | | | | | R | | | (Ref. TASK 32-42-27-210-006). | | | | | | R | | | (a) Make sure that there is no | | | | | | R | | | hydraulic fluid leakage at the | | | | | | R | | | piston, liners, supply lines, | | | | | | R | | | self-blanking unions and bleed | | | | | | R | | | screws. | | | | | | R | | | (b) Clean the piston housing with | | | | | | | | | a cloth and make sure it is in | | | | | | | | | the correct condition (no | | | | | | | | | separation, no blisters). | | | | | | R | | | (c) Make sure that the heat pack is| | | | | | | | | serviceable: | | | | | | | | | - carbon integrity | | | | | | | | | - free movement of the rotor | | | | | | R | | | discs | | | | | | | | | - cracks or signs of oxidation | | | | | | R | | | on the part of the rotor | | | | | | R | | | discs you can see. | | | | | | R | | | NOTE: Be careful with the | | | | | | | | | discs to prevent damage| | | | | | | | | to the protective | | | | | | | | | finish (anti-oxidation | | | | | | R | | | paint). | | | | | | | | |If you find damage: | | | | | | R  | | |- Remove the damaged brake unit for | |  X  | | | | R | | | overhaul | | | | | |
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM 時間限制/維護(hù)檢查 4(39)