曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

e-mails, phone calls, or hand shakes.
The only exception to this rule would be a Supplier Non-conformance Notification (SNN) which has been dispositioned
and approved by Liaison engineering. If a supplier deviates from current engineering drawings for
any reason, they can be held accountable for all cost of rework or repair. If there is an issue at the installation
level, Spirit will be responsible to correct the problem and revise the drawings or processes as required. Until
a revised and released drawing or an SNN has been released, the part/assembly must be manufactured per
the latest released engineering. For questions or issues please contact your Spirit Procurement Agent.
Spirit AeroSystems breaks ground on Saint-Nazaire facility - Spirit Press Release
Saint-Nazaire, France, Oct. 1, 2009 – Spirit AeroSystems, Inc. [NYSE: SPR], the world’s largest independent
supplier of commercial airplane assemblies and components, today broke ground on a new 5,378-squaremeter
facility in Saint-Nazaire, France.
Spirit is building the plant in Saint-Nazaire to receive center fuselage frame sections for the Airbus A350XWB
(Xtra Wide-Body) commercial aircraft from its facility in Kinston, N.C., USA. Sections designed and manufactured
in North Carolina will be shipped across the Atlantic, received in Saint-Nazaire, and assembled before
being transported to Airbus as “Section 15.”
“Today’s groundbreaking ceremony significantly highlights Spirit’s global scope,” said Dan Wheeler, Spirit
vice president/general manager, North Carolina Business Unit. “This new facility will allow Spirit to serve our
customer, Airbus, by assembling composite barrels for the A350 center fuselage section and delivering a
high-quality product.”
MAA1-10034-1 Supplier Nonconformance Revision A
Subject writing was released on September 3, 2009 with new form numbers. Please review this current writing
located on the SPN under the “Spirit Documentation” link and inside the folder titled Spirit Procurement
Documents.
Supply Chain Management
4 Supplier Communication | October / November 2009 | Issue 117
Notice of Discrepant or
Nonconforming Products (updated)
All Spirit AeroSystems suppliers are reminded that any discrepant or nonconforming products
must be brought to the attention of the buyer and the Spirit AeroSystems Quality Organization.
Reference AS9100 Rev. B. 7.4.2.
Similarly, Spirit AeroSystems General Terms and Conditions PF-550, Section 12 states:
Seller shall provide written notification to Buyer within one (1) business day after Seller
becomes aware that a nonconformance (i) is determined to exist, or (ii) is reasonably
believed to exist, on Product already delivered to Buyer under any Purchase Document.
The following must be included:
a. Affected process or product number and name;
b. Description of the problem (i.e., what it is and what it should be);
c. Quantity and dates delivered;
d. Suspect / affected serial number(s) or date codes, when applicable;
The Seller shall notify the Buyer’s SCPA and the Buyer Procurement Quality
Assurance Field Representative for the Buyer location where the
Product was delivered.
If the nonconforming condition has been previously identified
by Buyer, using a Nonconformance Record or equivalent
means and requesting a corrective action response,
the Seller shall notify the Buyer investigator identified on
the corrective action request that additional Product is affected.
Spirit form F09-01158 “Notification of Escapement” is available
on the Spirit portal and contains all of the required fields. Go to
Forms / Procurement Quality Assurance Forms.
In the event of a nonconformance disclosure or notification of discrepancy,
you should immediately contact the buyer of record for the
product, your Spirit Quality Assurance Field Representative, and the following
Quality Assurance organization contacts:
Ken Moran / kenneth.e.moran@spiritaero.com
Mark Turner / mark.w.turner@spiritaero.com
Robert Flaharty / robert.e.flaharty@spiritaero.com
Suppliers are encouraged to send written notification to the buyer of record, via certified mail.
Thank you in advance for giving this matter your immediate attention.
Supply Chain Management
5 Supplier Communication | October / November 2009 | Issue 117
Spirit has revised and enhanced the ASN (Advance
Ship Notice) process for ESIS HOM suppliers to limit
inadvertent over shipment and early shipments. If an
emergency requirement necessitates an immediate
shipment, the Procurement Agent can create a new
PO line for you to use within two hours of PO line
creation.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料20(19)