曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

set to 0.
5.2.5.2.8.1.3 MSP packet type (MP). This field shall be
set to 1.
5.2.5.2.8.1.4 Supervisoly packet (SP). This field shall be
set to 3.
5.2.5.2.8.1.5 Supervisory type (ST). This field shall be
set to 1.
5.2.5.2.8.1.6 User data length (LV). This field shall be
set as specified in 5.2.2.3.1. The maximum size of the user
data field for an INTERRUFT packet shall be 32 bytes.
5.2.5.2.8.1.7 User data (UD). The user data shall be
transferred from the IS0 8208 packet to the Mode S packet
using the S-bit packet reassembly processing as required.
5.2.5.2.8.2 Translation into IS0 8208 packets. Reception
by the XDLP reformatting process of Mode S INTERRUPT
packet(s) from the local XDCE shall result in the generatio11
of a corresponding IS0 8208 INTERRUPT packet to the local
DCE. The translation from the Mode S packet(s) to the IS0
8208 packet shall be the inverse of the processing defined in
5.2.5.2.8.1.
Annex 10 - Aeronautical Telecommunications Valume 111
5.2.5.2.9 INTERRUPT CONFIRMATION Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1.
5.2.5.2.9.1 Translation into Mode Spackets
5.2.5.2.1 0.1.3 Data packet type (DP). This field shall be
5.2.5.2.9.1.1 Translatedp~ckztformatR, eception by the set to 0.
XDLP reformatting process of an IS0 8208 INTERRUFT
CONFIRMATION packet from the local DCE shall result in 5.2.5.2.10.1.3 MSP packet type (MP). This field shall be
the generation of a corresponding Mode S MTERRUPT set to 1.
CONFIRMATION packet as follows:
5.2.5.2.10.1.4 Supervisory packet (SF). This field shall
be set to 2.
Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1.
5.2.5.2.9.1.2 Data ~~uckteypte (DP). This field shall be
set to 0.
5.2.5.2.9.1.3 MSP packet type (MP). This field shall be
set to 1.
5.2.5.2.9.1 -4 ~i~~ervisory~ackeiT(hSiPs f)i.e ld shall be
set to 3.
5.2.5.2.9.1.5 Supervisory Qpe (ST). This field shall be
set to 3.
5.2.5.2.9.1.6 Supervisory subset (SS). This field shall be
set to 0.
5.2.5.2.9.2 Translation into IS0 8208 packers. Reception
by the XDLP reformatting process of a Mode S INTERRUVT
CONFLRMATION packet from the local XDCE shall result in
the generation of a corresponding IS0 8208 INTERRUPT
CONFIRMATION packet to the local DCE. The translation
from the Mode S packet to the IS0 8208 packet shall be the
inverse of the processing defined in 5.2.5.2.9.1.
5.2.5.2.10 RESET REQUEST
5.2.5.2.10. I Translation into Mode S packets
5.2.5.2.10.1.5 Supervisoly type (ST). This field shall be
set to 2.
5.2.5.2.10.1.6 Reset cause code (RC) and diagnostic
code (DC). The reset cause and diagnostic codes used in the
Mode S RESET REQUEST packet shall be as specified in the
IS0 8208 packet when the reset procedure is initiated by the
DTE. If the reset procedure originates with the DCE, the DCE
state tables shall specify the diagnostic fields coding. In this
case. bit 8 of the reset cause field shall be set to 0.
5.2.5.2.10.2 TransIaiion into ISO 8208 packers. Recep
tion by the XDLP reformatting process of a Mode S RESET
packet from the local XDCE shall result in the generation of
a corresponding IS0 8208 RESET packet to the local DCE.
The translation from the Mode S packet to the IS0 8208
packet shall be the inverse of the processing defined in
5.2.5.2.10.1.
5.2.5.2.11 IS0 8208 RESTART REQUEST to Mode S
CLEAR REQUEST The receipt of an IS0 8208 RESTmT
REQUEST from the local DCE shall result in the reformatting
process generating a Mode S CLEAR REQUEST by ADLP or
Mode S CLEAR REQUEST by GDLP for all SVCs associated
with the requesting DTE. The fields of the Mode S CLEAR
REQUEST packcts shall be set as specified in 5.2.5.2.5 and
5.2.5.2.6.
Note.- There are no restart states in the Mode S packer
layer protocol.
5.2.5.3 PACKETS U)[3AL TO THE
MODE S SUBNETWORK
5.2.5.2.10.1.1 Translated packet format. Reception by Note.- Packets dejined in this section do not result in the
the XDLP reformatting process of an IS0 8208 RESET generation of an IS0 8208 packet.
REQUEST packet from the local DCE shall result in the
generation of a corresponding Mode S RESET REQUEST
packet as follows: 5.2.5.3.1 MODE S RECEIVE READY
5.2.5.3.1.1 Packet formar. The Mode S RECEIVE
READY packet arriving from an XDLP is not related to the
control of the DTWCE interface and shall not cause the
generation of an IS0 8208 packet. The format of the packet
shall be as follows:
Annex 10 - Aeronautical Telecommrrnications
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：附件10--航空電信an10_v3_1ed_amend_73(20)