曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

operational
(performance)
calculations.
lengthAccuracy ValDistanceType Accuracy of the
value of the
physical length of
the runway.
nominalWidth ValDistanceType The declared
transversal extent
of the runway for
operational
(performance)
calculations.
widthAccuracy ValDistanceType Accuracy of the
value of the
physical width of
the runway.
widthShoulder ValDistanceType The value of the
runway shoulder
width.
lengthStrip ValDistanceType The value of the
physical length of
the strip. The
runway strip is a
Runway ^
defined area
including the
runway and, if
applicable, the
stop-way. It is
intended (a) to
reduce the risk of
damage to aircraft
running off the
runway and (b) to
protect aircraft
flying over the
runway during
take-off or landing
operations.
widthStrip ValDistanceType The value of the
physical width of
the strip.
lengthOffset ValDistanceSignedType A value specifying
the longitudinal
offset of the strip,
when it is not
symmetrically
extended beyond
the two runway
ends. Notes: The
longitudinal offset
defines the
distance along the
centreline from
the middle of the
runway centreline
towards the
middle of the strip
centreline. An
offset in the
direction defined
from the threshold
with the lower
runway direction
designation
number towards
the opposite
runway threshold
is indicated by a
positive value. An
offset in the
opposite sense is
indicated by a
negative value.
Runway ^
Example: a
runway oriented
09/27 has a strip
that is extending
120 m before the
threshold of the
runway direction
09 and only 100
m before the
threshold of the
runway direction
27. The value of
the longitudinal
offset will be -10
m.
widthOffset ValDistanceSignedType A value specifying
the lateral offset
of the strip, when
it is not
symmetrically
extended beyond
the two runway
edges. Note: The
lateral offset
defines the
distance from the
runway centreline
to the strip
centreline in
direction
perpendicular to
the runway
centreline. An
offset to the right,
based on the
direction defined
from the threshold
with the lower
runway direction
designation
number towards
the opposite
runway threshold,
is indicated by a
positive value. An
offset to the left is
indicated by a
negative value.
Example: a
runway oriented
09/27 has a strip
Runway ^
that is extending
150 m to the right
of the runway
direction 09 and
300 m to the left
of the same
runway direction.
The value of the
lateral offset will
be -75 m.
abandoned CodeYesNoType Indicating that the
surface is no
longer in
operational use,
but it is still
physically present
and visible,
although usually
in a degraded
state.
surfaceProperties SurfaceCharacteristics(0..1) Surface
characteristics of
the runway.
associatedAirportHeliport AirportHeliport(0..1) The Airport the
Runway is
associated with.
overallContaminant RunwayContamination(0..*) Runway
contaminant.
annotation Note(0..*)
areaContaminant RunwaySectionContamination(0..*) Area
contamination of
a runway.
Used by
RunwayDirection
RunwayElement
TaxiHoldingPosition
TouchDownLiftOff
RunwayMarking
Runway ^
RadarSystem
See diagrams: 2 - AirportHeliport Associations
3 - Taxi Holding Position
1 - Runway
2 - Runway Direction
1 - Surface Marking
1 - TLOF
1 - Surveillance System
1 - Surface Contamination
RunwayBlastPad ^
<<feature>> [Logical View::AIXM::AIXM
Features::AirportHeliport::Runway
]
Definition
Specially prepared surface placed adjacent to the end of a runway to eliminate the
erosive affect of the high wind forces produced by airplanes at the beginning of their
takeoff rolls.
Properties
length ValDistanceType Overall length of the
feature
status CodeStatusOperationsType Temporal description
of the operational
state of the feature.
This attribute is used
to describe real-time
status
usedRunwayDirection RunwayDirection(0..1) The RunwayDirection
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AIXM_51_final(134)