(2)
Install the sidewall panels 131AW, 131BW, 131CW, 131DW, 132BW, 132EW.
(3)
Close the FWD cargo compartment door 825 (Ref. TASK 52-30-00-860-002).
(4)
Close the access door 824 (Ref. TASK 52-41-00-410-002).
(5)
Remove the access platform(s).
R 1EFF : ALL 1 05-21-20 Page 619 1 1 Aug 01/05 1 1 1CES 1 R **ON A/C 151-199, 401-499,
Subtask 05-21-20-410-059-B
A. Close Access
(1)
Install the floor panels 127BF, 127BG, 127CF, 127DF, 128CF, 128EG, 128GF (Ref. TASK 53-12-13-400-001).
(2)
Install the sidewall panels 131AW, 131BW, 131CW, 131DW, 132BW, 132EW.
(3)
Close the FWD cargo compartment door 825 (Ref. TASK 52-30-00-860-002).
(4)
Close the access door 824 (Ref. TASK 52-41-00-410-002).
(5)
Remove the access platform(s).
R 1EFF : 151-199, 401-499, 1 05-21-20 Page 620 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 05-21-20-200-012 Zonal Inspection of Nose Gear Well, Including Zone 124
1.
Reason for the Job Refer to the MPD TASK: ZL-123-02
2.
Job Set-up Information
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-22-00-010-001 Nose Gear Doors - Ground Doors Opening 32-22-00-410-001 Nose Gear Doors - Ground Doors Closing
3. Job Set-up Subtask 05-21-20-010-062
A. Get Access
(1) Open the nose landing gear doors 713 and 714. (Ref. TASK 32-22-00-010-001)
4. Procedure Subtask 05-21-20-210-061
A. Inspection
(1)
Do a general visual inspection of the nose gear well (Zones 123 and 124).
(2)
Make sure that there are no signs of corrosion, cracks or damage.
(3)
Make sure that all the installations (wiring, ducting, piping) are attached correctly.
1EFF : ALL 1 05-21-20 Page 621 1 1 Aug 01/05 R 1 1 1CES 1
5. Close-up Subtask 05-21-20-410-062
A. Close Access
(1) Close the nose landing gear doors 713 and 714. (Ref. TASK 32-22-00-410-001)
ZONAL INSPECTION : FORWARD CARGO COMPARTMENT - INSPECTION/CHECK
TASK 05-21-30-200-001
Zonal Inspection of the FWD Cargo Compartment (Zones 131 and 132)
1.
Reason for the Job Refer to the MPD TASK: ZL-131-01
2.
Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2.5 m (8 ft. 2 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
3. Job Set-up Subtask 05-21-30-010-050
A. Get Access
(1)
Put an access platform in position at the zones 131 and 132.
(2)
Open the FWD cargo compartment door 825. (Ref. TASK 52-30-00-860-001)
4. Procedure Subtask 05-21-30-210-050
A. Inspection
(1)
Do a general visual inspection of the forward cargo compartment (Zones 131 and 132).
(2)
Make sure that there are no signs of corrosion, cracks or damage.
5. Close-up Subtask 05-21-30-410-050
A. Close Access
(1)
Close the FWD cargo compartment door 825. (Ref. TASK 52-30-00-860-002)
(2)
Remove the access platform(s).
TASK 05-21-30-200-002
Zonal Inspection of Underfloor Bay of FWD Cargo Compartment
1.
Reason for the Job
Refer to the MPD TASK: ZL-133-01
2.
Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
B. Referenced Information
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 時間限制/維護檢查 3(21)
