曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

directory) file contains the aircraft Mode S allocations plus wild
------------------
- . Putting the 2 lines together you can see how it works.
------------------
o ---
Page 71
)
AirNav® Systems
AirNav RadarBox 2008 Manual
UF,US Mil 3,1010110111110111111-----
UF,US Mil 2,1010110111111-----------
UF,US Mil 1,1010111-----------------
US,United States,1010--------------------
Instructions on how to modify the D008.dat File
1. Shut down RadarBox
2. Use MS Explorer to navigate to the RadarBox Data directory, the default should be:
C:/Program Files/AirNav Systems/AirNav RadarBox 2008/Data
3. Make a copy of the D008.dat file and rename it (for example D008.dat.org) so you can revert to the default settings
if you need to. If you can't see the file extension (.dat), you will need to go to Tools/Folder options/View
"Hide extensions for known file types".
4. Using Windows Notepad, open the original D008.dat file (not the one you have just saved as a copy) and you will see
that the file is in this format but has many more lines:
AF,Afghanistan,011100000000------------
AL,Albania,01010000000100----------
DZ,Algeria,000010100---------------
AO,Angola,000010010000------------
AG,Antigua and Barbuda,00001100101000
AR,Argentina,111000------------------
AM,Armenia,01100000000000----------
AU,Australia,011111------------------
AT,Austria,010001000---------------
AZ,Azerbaijan,01100000000010----------
BS,Bahamas,000010101000------------
5. Copy the following line and insert it in the D008.dat file above the UK line:
RA,RAF,0100001111--------------
So that the appropriate bit of the .dat file looks like this:
TM,Turkmenistan,01100000000110----------
UG,Uganda,000001101000------------
UA,Ukraine,010100001---------------
AE,United Arab Emirates,100010010110------------
RAF,RAF,0100001111--------------
UK,United Kingdom,010000------------------
TZ,United Republic of Tanzania,000010000000
6. Copy the following lines and insert them above the US line in the .dat file:
UF,US Mil 5,101011011111011111001---
UF,US Mil 4,10101101111101111101----
UF,US Mil 3,1010110111110111111-----
UF,US Mil 2,1010110111111-----------
UF,US Mil 1,1010111-----------------
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
00001100101000----------
at ----------
------------
------------------
000010000000------------
---
Page 72
and untick
AirNav® Systems
AirNav RadarBox 2008 Manual
So the appropriate section of the .dat file now looks like looks like this:
TM,Turkmenistan,01100000000110----------
UG,Uganda,000001101000------------
UA,Ukraine,010100001---------------
AE,United Arab Emirates,100010010110------------
RAF,RAF,0100001111--------------
UK,United Kingdom,010000------------------
TZ,United Republic of Tanzania,000010000000
UF,US Mil 5,101011011111011111001---
UF,US Mil 4,10101101111101111101----
UF,US Mil 3,1010110111110111111-----
UF,US Mil 2,1010110111111-----------
UF,US Mil 1,1010111-----------------
US,United States,1010--------------------
UY,Uruguay,111010010000------------
UZ,Uzbekistan,01010000011111----------
VU,Vanuatu,11001001000000----------
7. Click "Save" in notepad to save the modified D008.dat file. Points to note here:
- the number of "-" characters is vital. Every Mode S Hex code (111010010000
length.
- make sure that you don't insert any blank lines or spaces when you are inserting the new lines.
- the D008.dat file MUST be saved as a txt file (so don't use Word or Wordpad any other program) and it must be named
D008.dat and NOT D008.dat.txt which might happen if you use "Save as". Look at the file in Explorer to make sure the
name is correct.
8. Right click on this image and choose "Copy" and paste it into your favorite graphics editor.
The picture must be saved as a bmp to the c:/Program Fil
and must be named RA.BMP
Same again for this one, but this time it must be saved as UF.BMP
9. Close Notepad and run RadarBox. Wait for a Brit Mil or US Mil aircraft to be picked up either as
and you should see the Mil flag in the aircraft list if you have the Flags set to show in Preferences.
Displaying Other Flags
Although this has only covered 2 new flags, the principle can be applied to display flags for any gr
individual registrations. All you need is the Mode S Hex code, Windows Calculator to convert the Hex code to a Binary
code and a bmp saved in the /Flags directory.
Military and Civilian Fags are available on
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AirNav RadarBox 2008 Manual(21)